EASILY READ  0.1 mm EVEN 0.05 mm BY EYE
 OUR TAPER GAGES ARE HIGH QUALITY PRECISION MADE AND CERTIFIABLE

E-MAIL US HERE                SPARTAN TOOL SALES INC. USA           PHONE 1 586-268-1556

Tapered Metric Gauges  Gap and Levelness Gages

METRIC TAPER GAGE & 120 mm RULE IN ONE
Stainless Steel 1-15 mm taper gage on front side and 120 mm rule plus diameter correction table on reverse side. Use the width of taper gage to measure gap. Permanently attached handle locks into the heavy plastic case, provided with pocket clip, to keep gage and pockets from damage. All the features of the combo set in a convenient one piece metric taper gage.

PLASTIC METRIC TAPER GAUGE & RULER COMBO
Will not damage surfaces, excellent for measuring slot widths and face to face dimensions.     0.1 mm graduations are accurate within 0.05 mm.  Flexible plastic ruler measures in 1.0 mm graduations. The taper gage is available in a thickness of 1/8” RIGID or 1/16” FLEXIBLE.

METRIC TAPER GAGE & RULER COMBO - STAINLESS STEEL
1 to 15 mm Metric Taper Gage for measuring ID of tubing, bore, slot widths, hole sizes and flange face to face dimensions. Folds safely w/ pocket clip.- Stainless steel 0.1 graduations are accurate within 0.05mm

METRIC TAPER GAGE & RULER COMBO - STAINLESS STEEL
1 to 15 mm Metric Taper Gauge for measuring slot and gap widths, hole sizes and flange face to face dimensions. Handy depth gage on ruler. Back of taper gauge is printed with diameter correction table Handy when checking holes. Made of Stainless Steel.
 0.1 graduations are accurate within 0.05mm

METRIC TAPER GAGE 1TG7001-15
Metric Taper Gauge 1 to 15 mm on front. A 120 mm rule with a diameter correction table on the reverse side. Use the width of taper gage to measure gap. Great for measuring gaps, slot widths, hole or bore sizes and flange face to face dimensions. Stainless steel 0.1 graduations are accurate within 0.05mm

“IMPROVED” - Gage on front and precision ruler on back

RETRACTABLE METRIC TAPER GAGE
1 to 9 mm Metric Taper Gauge for measuring ID of tubing, slot widths, hole sizes and flange face to face dimensions. Gauge retracts safely into it’s plastic case.
.Stainless steel.  0.1 graduations are accurate within 0.05mm

The graduations on these high quality metric taper gauges are engraved or "etched" to ensure permanent markings. The black filled markings are on a hard chrome matte finish which reduces glare and gives you a sharp, accurate and easy to read taper gage. The graduations on other inexpensive metric gauges are often screen printed or on a polished finish which makes them hard to read, less accurate and will wear off the gage over time. Although these gages are referred to as a taper gage, they do not measure tapers.

ROUND TAPERED GAUGES FOR ACCURATE READINGS IN HOLES AND SLOTS
 

PLASTIC METRIC TAPER GAUGE 1 - 15mm
Will not damage painted surfaces excellent for measuring ID of slot widths and face to face dimensions.  Available in  0.1mm or 0.5mm graduations. These gages are accurate within 0.05mm. Plastic taper gage for nondestructive applications. 
These taper gages come standard in a thickness of 1/8” RIGID PLASTIC but are available in 1/16” FLEXIBLE PLASTIC upon request.

BENT GO-NO GO METRIC FEELER PLUG GAGES
Plug gages are bent to 135 degrees to allow inspection and checking of fixtures in tight areas. These bent go- no go plug gages are not intended to measure angles. The plug gages are bent to allow access in tight areas. Go Nogo Sizes are available .22 mm to 4.00 mm.  Standard sizes available also.   CALL FOR QUOTE

ORDER LINE  1-586-268-1556
 E-MAIL US HERE

[SPARTAN] [AIR TOOLS] [PRECISION] [ABSORBENTS] [ABOUT US] [SPECIALS] [FEATURED]